Skip to content
edutymes
Menu
  • Home
  • Updates
  • Scholarships
  • Study Notes
  • Results
  • Past Papers
Menu

Utaratibu mpya wa kuomba chuo

Posted on June 29, 2022 by Edutymes


Tanzania  Commission  for  Universities (TCU)

Table of Contents

Toggle

  • 1.0       Introduction
  • 2.0  Application and Admission Process
  • 3.0 Minimum Entry Requirements for Undergraduate Degrees in 2017/2018 Admission Cycle
  • Table 1: General Minimum Admission Entry Qualifications for 2017/2018 Admission Cycle
  • Table 2: Admission Requirements for Direct Entrants and Equivalent Entrants for Health Related Programmes
  • 4.1             The Roles of TCU
  • 4.2   The Roles of Higher Learning Institutions
  • 4.3             The Roles of the National Examinations Council of Tanzania (NECTA)
  • 4.4             The Roles of the National Council for Technical Education (NACTE)
  • 4.5             The Roles of Prospective Students
  • NB: All students are advised to make adequate arrangements to meet the costs related to the programme being applied for.
  • 5.0Admission Activities Timetable for 2017/18 admission cycle
  • Table 3: Admission Activities Timetable for 2017/18 admission cycle

Admission Procedure for 2017/18 Admission Cycle

 

 

1.0       Introduction

 

Sections 5 (1) (c) (i) of the Universities Act Cap. 346 of the Laws of Tanzania, mandates  TCU to provide guidance and monitor criteria for admission to Universities in the United Republic of Tanzania. Hence, TCU is responsible for coordinating admission into various Undergraduate degree programmes in Higher Learning Institutions (HLIs) in Tanzania.

 

In making sure that admissions into HLIs are fair, smooth and well coordinated TCU has prepared a procedure for that purpose. The procedure in place elucidates the roles of each key stakeholder in the admission process.

 

2.0  Application and Admission Process

 

In handling application and admission processes the following stakeholders will be involved: Tanzania Commission for Universities (TCU), Higher Learning Institutions (HLIs), the National Examinations Council of Tanzania (NECTA), National Council for Technical Education (NACTE) and Prospective students.

The application and admission process will be as follows:

 

  • HLIs to advertise their programmes through various media;

 

  • Prospective applicants to lodge their applications to institutions of their preference;

 

  • HLIs to receive applications through their systems and authenticate the applicants’ qualifications through NECTA and NACTE databases;
  • TCU to issue accounts to each individual institution to allow exchange of admission data/statistics/information;

 

  • HLIs to process students’ applications and selections through their systems and approve Senates/Boards before uploading to TCU portal;
  • TCU to verify the lists of selected applicants using NECTA and NACTE databases and give feedback to HLIs for announcing admitted students; and
  • TCU to finally process and organize all admission data on its database for future

 

 

3.0 Minimum Entry Requirements for Undergraduate Degrees in 2017/2018 Admission Cycle

The Commission informs Higher learning institutions (HLIs) that they will only be allowed to admit students who meet the Commission’s approved minimum entry and specific entry requirements set for each programme as stated in the Undergraduate Admission Guidebook. The institutions should admit students in the three recognized schemes:

  1. The direct entry scheme;
  2. The equivalent qualifications entry scheme; and
  • The Recognition of Prior Learning (RPL) entry scheme.

 

The public is also informed that the minimum entry requirements for 2017/2018 for all programmes, except health-­‐related programmes are presented in Table 1:

 

Table 1: General Minimum Admission Entry Qualifications for 2017/2018 Admission Cycle

 

NO. CATEGORY OF APPLICANTS MINIMUM ADMISSION ENTRY QUALIFICATIONS
1 Completed A-­‐Level studies before 2014 Two principal passes with a total of 4.0 points from Two Subjects defining the admission into the respective programme (where A = 5; B = 4; C= 3; D = 2; E = 1).
2 Completed A-­‐Level studies in 2014 and 2015 Two principal passes (Two Cs) with a total of 4.0 points from Two Subjects defining the admission into the respective programme (where A = 5; B+ = 4; B = 3; C= 2; D = 1). Grade ‘D’ is not considered as a principal pass in this category.
3 Completed A –Level studies from 2016 Two principal passes with a total of 4.0 points from Two Subjects defining the admission into the respective programme (where A = 5; B = 4; C= 3; D = 2; E = 1).
4 Recognition of Prior Learning qualification B+ Grade: where A =75-­‐100, B+ = 65-­‐74, B=50-­‐64, C =40-­‐ 49, D = 35-­‐39, F = 0-­‐38.
5 Equivalent applicants At least four O’-­‐Level passes (Ds and above) or NVA Level III with less than four O’-­‐Level passes or equivalent foreign qualifications as established by either NECTA or VETA; AND
i) At least a GPA of 3.0 for Ordinary Diploma (NTA Level 6); OR
ii) Average of C for Full Technician Certificate (FTC) (where A=5, B=4, C=3, and D=2 points); OR
iii) Average of ‘B’ Grade for Diploma in Teacher Education; OR
iv) Average of ‘B’ Grade for Health-­‐related awards such as Clinical Medicine and others; OR
v) A Distinction for unclassified diplomas and certificates.
vi) Upper Second Class for classified non-­‐NTA diplomas.

 

The minimum entry requirements for health related programmes for 2017/18 academic year are presented in Table 2:

Table 2: Admission Requirements for Direct Entrants and Equivalent Entrants for Health Related Programmes

 

 

A: Direct Entrants

SN DEGREE PROGRAMME ENTRY REQUIREMENTS
1 Doctor of Medicine

(MD/MBBS)

Three principal passes in Physics, Chemistry, and Biology with minimum entry of 8 points. Whereby one must have at least C grade in Chemistry and Biology and at least D grade in Physics.
2 Doctor of Dental Surgery

(DDS)

Three principal passes in Physics, Chemistry, and Biology with minimum entry of 8 points. Whereby one must have at least C grade in Chemistry and Biology and at least D grade in Physics.
3 Bachelor of Pharmacy

(BPharm)

Three principal passes in Physics, Chemistry, and Biology with minimum entry of 8 points. Whereby one must have at least C grade in Chemistry and Biology and at least D grade in Physics.
4 Bachelor of Medical Laboratory Sciences (BMLS) Three principal passes in Physics, Chemistry, and Biology with minimum entry of 6 points. Whereby one must have at least C grade in Chemistry and at least D grade in Biology and E grade in Physics.
5 Bachelor of Science in Radiation Therapy Technology (BSc RTT) Three principal passes in Physics, Chemistry, and Biology with minimum entry of 6 points. Whereby one must have at least C grade in Chemistry and at least D grade in Biology and E grade in Physics.
6 Bachelor of Science in Prosthetic and Orthotics (BSc PO) Three principal passes in Physics, Chemistry, and Biology with minimum entry of 6 points. Whereby one must have at least C grade in Chemistry and at least D grade in Biology and E grade in Physics.

 

7 Bachelor of Science in Nursing (BScN) Three principal passes in Chemistry, Biology and either Physics or Mathematics or Nutrition with a minimum of 6 points. Whereby one must have at least C grade in Chemistry and at least D grade in Biology and E grade in Physics or Mathematics or Nutrition.
8 Bachelor of Science in Environmental Health Sciences (BSc EHS) Three principal passes in Chemistry, Biology and either Physics or Mathematics or Nutrition or Geography or Agriculture with a minimum of 6 points. Whereby one must have at least C grade in Chemistry and at least D grade in Biology and E grade in Physics or Mathematics or Nutrition or Geography or Agriculture.
9 Bachelor of Medical Three principal passes in Physics, Chemistry, and
Laboratory Sciences in Biology with minimum entry of 6 points. Whereby one
Clinical Chemistry, Bachelor must have at least C grade in Chemistry and at least D
of Medical Laboratory grade in Biology and E grade in Physics.
Sciences in Hematology and
Blood Transfusion, Bachelor
of Medical Laboratory
Sciences in Histotechnology,
Bachelor of Medical
Laboratory Science in
Microbiology and
Immunology, Bachelor of
Medical Laboratory Sciences
in Parasitology and Medical
Entomology and Bachelor of
Medical Laboratory Sciences
General
10 Bachelor of Sciences in Three principal passes in Physics, Chemistry, and
Health Laboratory Biology with minimum entry of 6 points. Whereby one
and Bachelor of Science in Physiotherapy must have at least C grade in Chemistry and at least D

grade in Biology and E grade in Physics.

11 Bachelor of Science in Optometry Three principal passes in Physics, Chemistry, and

Biology with minimum entry of 6 points. Whereby one

 

must have at least C grade in Physics and at least D grade in Biology and E grade in Chemistry/Mathematics
B: Equivalent Entrants

 

All equivalent applicants may apply for above programmes if they meet the requirements stated below:

 

i.   Certificate of Secondary Education Examination (CSEE) with at least Five (5) passes including two credit passes in Chemistry and Biology and a D grade in Physics PLUS appropriate Diploma or Advanced Diploma with an average of “B+’’ or GPA of 3.5

OR

 

ii.   BSc (lower second) majoring in Physics/Mathematics, Chemistry, Biology /Zoology.

C.  Holders of foreign qualifications

 

All applicants holding foreign qualifications must have their qualifications validated and equated by the respective regulatory bodies before submitting their applications for admissions as follows:

 

i.          The National Examination Council of Tanzania in respect of certificates secondary education and teacher education; and

ii.          The National Council for Technical Education in respect of NTA Level 6 qualification.

 

 

  • Roles of Stakeholders

 

To facilitate the admission, process the key stakeholders will have different roles.

 

4.1             The Roles of TCU

 

The roles of TCU shall be as follows:

 

  1. To set minimum entry requirements for approved pathways/categories of admission into HLIs;
  2. To communicate the academic calendar to HLIs;
  • To produce and circulate Admission Guidebook;
  1. To prepare portal for receiving selection data from HLIs;
  2. To handle all quality assurance issues in the admission process; and

 

  1. To ascertain that selection processes were conducted fairly and consistently in accordance to set minimum
  • To validate all selected applicants in order to:
    1. authenticate their qualifications;
    2. check their eligibility into the programmes they have been selected;
    3. check if programmes have TCU’s/NACTE approval; and
    4. Check if programme capacities have been adhered
  • To identify and notify HLIs prior to admission concerning applicants with:
    1. multiple admissions;
    2. unacceptable entry qualifications;
    3. anomalies in examination results and
    4. Prior admission.
    1. To educate and create awareness to applicants and other stakeholders on matters related to admissions;
    2. To train institutions’ Admission Officers on the use of TCU portal;
    3. To conduct regular and impromptu admission audits;

  • To maintain database of applicants, admitted and enrolled students in HLIs within the University Information Management System (UIMS) framework;
  • To set deadlines for applications, admission, and transfer of students;
  • To set procedures for inter and intra-­‐institutional transfers; and
  1. To approve inter and intra-­‐institutional transfers.

 

4.2   The Roles of Higher Learning Institutions

 

  1. To develop an online application platform capable of linking with TCU portal;

 

  1. To advertise only the TCU and NACTE approved programmes with details as indicated in the Admission Guidebook;
  • To create a helpdesk for applicants who might need assistance during application period;
  • To receive applications through their online systems;
  1. To maintain a database of all applicants (applied and selected) for further reference within the UIMS framework;
  • To authenticate the applicants’ qualifications through NECTA and NACTE databases; vii.To vet the equivalence of foreign qualifications with the national equivalences before

processing their applications;

viii.To process the applications for admissions for recognized categories of applicants; ix.To select and approve applicants through their approval organs;

  1. To upload the list of both selected and non-­‐selected applicants into TCU portal;

 

  1. To announce both admitted and non-­‐admitted students (with reasons) through various media;
  • To upload into TCU portal applicants cleared from multiple admissions upon confirmation of the applicants;
  • To issue admission letters to selected and confirmed applicants; xiv.To handle all application appeals;
  1. To  handle   inter/intra-­‐institutional   and   credit   transfers   and   submit   to   TCU   in accordance to the set deadlines; and
  • To maintain a database of all applicants (applied and selected) for further reference within the UIMS framework.

 

4.3             The Roles of the National Examinations Council of Tanzania (NECTA)

 

The roles of NECTA shall be as follows:

 

  1. To announce and release the Form Six (6) examinations results in July 2017; and
  2. To provide access of its examinations results databases (both Form Four and Form Six) to Higher Learning Institutions (HLIs).

 

4.4             The Roles of the National Council for Technical Education (NACTE)

 

The roles of NACTE shall be as follows:

 

  1. To announce and release the Diploma/NTA6 examinations results in July 2017; and
  2. To provide access of its examinations results databases (Diploma, NTA6) to Higher Learning Institutions (HLIs).

 

4.5             The Roles of Prospective Students

 

Prospective applicants will be required to:

  1. To carefully read and understand the guidelines and programme admission requirements;
  2. To make an informed choice of programmes and institutions to apply for taking into account competition, one’s passes and career aspirations;
  • To apply directly through institution and channel all application queries to respective institution;
  1. To ensure the names and index numbers used during applications for admission to HLIs match with those used during their studies; and

 

  1. To confirm preferred institution in case one has multiple

NB: All students are advised to make adequate arrangements to meet the costs related to the programme being applied for.

 

5.0Admission Activities Timetable for 2017/18 admission cycle

 

Admission activities shall be conducted within specified time as indicated in Table 3:

Table 3: Admission Activities Timetable for 2017/18 admission cycle

 

Sn Activity Responsible Date
1 Educational and Awareness Programme to potential applicants via mass media. TCU Ongoing.
2 Training of Admission Officers in all HLIs TCU 13th -­‐14th July 2017.
3 The release of Form 6 Results. NECTA 21st July 2017.
4 The release of Diploma Results. NACTE 22nd July 2017.
5 Beginning of applications for 2017/18 admission cycle. Students and HLIs 22nd July 2017.
6 Deadline for applications in 2017/18 admission cycle. Students and HLIs 30th August 2017.
7 Deadline for uploading applied and admitted students into TCU portal. HLIs 15th Sept. 2017.
8 TCU Feedback to HLIs. TCU 30th Sept 2017.
9 Announcements of admitted students. HLIs 2nd October 2017.
10 Beginning of 2017/2018 Academic Year. HLIs 30th October 2017.
11 Deadline for uploading transfers on TCU portal. HLIs 20th Nov. 2017.
12 Beginning of admission Audits in HLIs. TCU 1st December 2017.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts

  • Check JCE Results 2023/2024 Online Now! – Botswana
  • Botswana JCE Results 2023/2024: Check SMS/Online
  • Botswana PSLE results 2023/24 – here’s direct link to check
  • My Results Botswana BEC: JCE & PSLE results 2023
  • MANEB JCE Results 2023 – JCE Pass List

Recent Comments

  1. Owami Watts on Limkokwing University Swaziland Application form 2023/2024

Categories

  • All Posts
  • Home
  • About us
  • Privacy Policy
  • Contact us
©2026 Edutymes | Design: Newspaperly WordPress Theme